TCano Norge AS
3D NANOPROTECT CAR
3D Nano Protect Car is a product designed in three dimensions
(layers) for optimal protection of painted surfaces, stainless steel,
polished steel, plastic surfaces, leather, etc. By constructing a
product of three "layers" provides a stronger binding to the surface
than has until now been possible, and that means longer protection.
3D Nano Protect will not be removed by degreasing like wax based
products. 3D Nano Protect is suitable for "nice" surfaces. If smooth
surfaces are matte/dirty, etc., we recommend treatment with
3D Nano Polish, as this will remove weathering and recall color,
while the surface being cleaned. 3D Nano Polish will provide the
same protection as 3D Nano Protect.
Properties:
• Quick and easy polishing. Apply a thin film on the surface, let it
dry for apx. one hour, and polish off!
• Excellent gloss and durability (up to 15 months on car paint).
(The gloss is enhanced by about 48 hour cure time).
• Durable "easy to clean" properties.
• Resists degreasing agents.
• Anti-fingerprint effect on metallic surfaces.
• Provides great shine and protection to most plastics and rubber
(no white stripes).
• Does not emit dust when polishing.
• 3D Nano Protect is compatible with Gelcoat Nanopolish.
• 3D Nano Protect does not contain abrasives. Contains no silicone.
Application/polishing:
Do not dilute. The surface to be treated must be clean and free
of grease and oil. Make a test on a suitable part of the surface
in advance to ensure compatibility (because of solvent content).
Polishing is characterized in that the product does not raise dust.
Since binding to the surface is strong, it should be recommended
polishing cloths.
User Guide:
• Car paint must be degreased!
• Surface must be free of wax, silicone, etc. and absolutely clean!
• Apply a very thin, opaque layer on the surface with a sponge, etc.
• Apply
all surfaces
in one operation.
A film is visible after drying up. It is recommended a drying time
of at least 60 mins. before polishing off. Then the chemical bond
to the substrate is completed.
3D NanoProtect
is
not
recommen-
ded applying with polishing machine.
• On car paint: Polish/wipe off with a microfiber cloth that is des-
igned for the purpose. Complete with a good polishing cloth.
• Can also be used on metal/rubber/plastics/leather/headlights
(Lexan): Polish with a good polishing cloth.
• Full gloss is achieved after about 48 hours.
• Do not use wax at car wash after the car is treated with 3D Nano
Protect.
• Do not use wax-based products for polishing after treatment.
Apply a little more of the product on exposed areas, or when the
effect seems to diminish.
• Prevent applying on glass surfaces. It can easily be removed
with a damp cloth before it dries up.
• The car can be used immediately after polishing.
TCNANO NORGE AS, Cecilie Thoresens vei 7 D, 1153 Oslo.
